---------------------------------plugin note 2011-06-14-----------------------------------------------------------------

1. renew mcas, improve key editor.
2. add plugin_camconfig.s and plugin_e2upgrade.s



---------------------------------plugin note 2011-04-21-----------------------------------------------------------------

update spcs 
1. update to spcs2.5.40 (can only run with encrypt.ko)
update mcas: 
1. update latest mcas lib
2. add twin protocol support

---------------------------------plugin note 2011-03-01-----------------------------------------------------------------
notice!!
1. make sure conax is disable in system/basic setting/conditional access/conax
2. now only support camd.socket mode and linux dvb api V3, so make sure set mgcamd to box type 6.
3. now can only descramble one channel in mgcamd, which means you can NOT record one channel and watch the other channel.
4. now can support multi-channel in oscamd, which means you can record one and watch the other one.
5. now still have some problem with smart card driver, which means mcas.stripped maybe working with problem.
6. make sure don't open two client at the same time. for example, don't start mgcamd and oscamd at the sametime.
7. mcas and sharing client can be excueted at the same time.
8. add spcs for middle east



usb installation: 
1.copy plugin folder to the root directory of first partition of usb stick (like c:/plugin/). 
2.connect usb stick to stb. stb shall prompt a message to user to upgrade plugin.

ftp installation: 
1.ftp to stb and copy plugin folder to /root.
2.better wait for sometime (10-20 seconds) because stb may need to flush cache data to nand flash.

mgcamd configuration:
1. ftp to stb and config mgcamd in /var/keys
2. better wait for sometime (10-20 seconds) because stb may need to flush cache data to nand flash.
3. restart mgcamd

oscamd configuration:
1. ftp to stb and config oscamd in /var/tuxbox/config
2. better wait for sometime (10-20 seconds) because stb may need to flush cache data to nand flash.
3. restart oscamd

how to use spcs
1. go to plugin menu and press ok to start proton-tools
2. press green button then you can see menu of it
3. go to download settings and press ok to download configuration
4. enter #55#007* as activation code
5. exit proton-tools menu and start spcs

---------------------------------plugin note 2010-11-15-----------------------------------------------------------------